[Systers-dev] Testing Request for Bug 583379

[Jason Cox]

Robin,

I will create a new test list and test out SBT1 and SBT2. Assuming they
pass, I will send out a new email with information on the rest of the tests.

Jason

On Tue, Jun 8, 2010 at 1:34 PM, Robin Jeffries <robin at jeffries.org> wrote:

> Ok, it's working now.  Jason, if you can create a dlist now, (with the
> updated code), put that in the testing template and let folks have a go at
> it, we should be good.  If I can, I will try both the SBT tests ASAP, as
> they ought to be done early (we should redo the one I did, but I didn't do
> the admin one, as I don't have the admin password to change_email-test)
>
> Lesson: someone (not the person who changed the code, perhaps the person
> leading the test cycle) should try the tests specific to the bug before
> "real"testing starts, as those are the tests most likely to fail, and we can
> save work by getting that fixed first.
>
> Robin
>
>
> On Mon, Jun 7, 2010 at 11:10 PM, kanika vats <kanika.krikan at gmail.com>wrote:
>
>> Hi Robin,
>>
>> Yes the steps you gave helped me track down the error.I have corrected the
>> error (had to use addr.lower() in place of addr in one of the code lines).I
>> have made the changes directly in DlistUtils.py at abiwt.org but I will
>> make a commit to the required branch too.You can test and let me know
>> whether the problem still exists or not.
>>
>> Thanks
>>
>>
>> On Tue, Jun 8, 2010 at 10:08 AM, Robin Jeffries <robin at jeffries.org>wrote:
>>
>>> Nope, I still get the error with the list Change_email_test.  Here is the
>>> traceback below.  I'm not sure what others are doing differently.  This is
>>> how I create the error.
>>>
>>> - go to www.abiwt.org/mailman/listinfo/change_email_test
>>> - fill out the subscription information.  The email address I used was
>>> JeffRies at google.com
>>> - Wait for the "please confirm your subscription" message to arrive
>>> - click on the confirmation link (BTW, I can go to the options page from
>>> there, but that one only asks me to enter my password, and tells me that I
>>> am on the page for jeffries at google.com -- all lower case)
>>> - go back to www.abiwt.org/mailman/listinfo/change_email_test
>>> - enter my mixed case email address in the last text box on the page
>>> - see the "you have hit a bug" error message on the resulting page.
>>>
>>> Also BTW, I entered my user name (mixed case or lower case -- I tried
>>> both) and password for the line that goes to the subscriber list, and that
>>> worked just fine, but then that doesn't need access to the postgres
>>> database.
>>>
>>> Kanika Vats, does this help you track it down?
>>>
>>> Robin
>>>
>>>
>>> Jun 07 21:30:02 2010 admin(1448):
>>> @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
>>> admin(1448): [----- Mailman Version: 2.1.10 -----]
>>> admin(1448): [----- Traceback ------]
>>> admin(1448): Traceback (most recent call last):
>>> admin(1448):   File "/usr/local/mailman/scripts/driver", line 101, in
>>> run_main
>>> admin(1448):     main()
>>> admin(1448):   File "/usr/local/mailman/Mailman/Cgi/options.py", line
>>> 821, in main
>>> admin(1448):     options_page(mlist, doc, user, cpuser, userlang)
>>> admin(1448):   File "/usr/local/mailman/Mailman/Cgi/options.py", line
>>> 865, in options_page
>>> admin(1448):     subscriber_id =
>>> subscriber.getSubscriber_id_raw_or_die(user)
>>> admin(1448):   File "/usr/local/mailman/Mailman/DlistUtils.py", line 98,
>>> in getSubscriber_id_raw_or_die
>>> admin(1448):     raise ErrorsDlist.InternalError
>>> admin(1448): InternalError
>>> admin(1448):    HTTP_REFERER:
>>> http://abiwt.org/mailman/listinfo/change_email_test
>>> admin(1448):    SERVER_SOFTWARE: Apache/2.2.8 (Ubuntu)
>>> PHP/5.2.4-2ubuntu5.10 with Suhosin-Patch
>>> admin(1448):    SCRIPT_NAME: /mailman/options
>>> admin(1448):    SERVER_SIGNATURE: <address>Apache/2.2.8 (Ubuntu)
>>> PHP/5.2.4-2ubuntu5.10 with Suhosin-Patch Server at abiwt.org Port
>>> 80</address>
>>> admin(1448):
>>> admin(1448):    REQUEST_METHOD: POST
>>> admin(1448):    PATH_INFO: /change_email_test
>>>
>>>
>>> On Mon, Jun 7, 2010 at 1:08 PM, Jason Cox <jasonwilburcox at gmail.com>wrote:
>>>
>>>> Kathy,
>>>>
>>>> Ok, that is how I was thinking it works.
>>>>
>>>> Thanks!
>>>>
>>>> Jason
>>>>
>>>>
>>>> On Mon, Jun 7, 2010 at 3:48 PM, Kathy Richardson <kjr at casaveracruz.com>wrote:
>>>>
>>>>>
>>>>>
>>>>> Jason,
>>>>>
>>>>> I'm answering this because I want to test my understanding, and hope
>>>>> others will correct me if I am wrong.
>>>>>
>>>>> Robin said I was wrong about any old code running.   I now believe that
>>>>> this is the deal:
>>>>>  MM stopped
>>>>>  Apache stopped
>>>>>
>>>>>  The new code was installed ( python files over writing existing python
>>>>> files)
>>>>>
>>>>>  MM started
>>>>>  Apache started
>>>>>
>>>>> This means that all/any data or messages that existed before the
>>>>> upgrade are still there.
>>>>> The new code needs to run on the exact same data.  If not then a
>>>>> conversion step needs to take place after stopping the services and before
>>>>> restarting then.  Of course new code could be smart enough to handle a
>>>>> complicate upgrade in functionality seamlessly.
>>>>>
>>>>> Kathy
>>>>> On Jun 7, 2010, at 10:45 AM, Jason Cox <jasonwilburcox at gmail.com>
>>>>> wrote:
>>>>>
>>>>> Robin,
>>>>>
>>>>> On Fri, Jun 4, 2010 at 7:28 PM, Robin Jeffries <robin at jeffries.org>
>>>>> wrote:
>>>>>
>>>>> Jason and company need to create a list for this testing cycle (it
>>>>> needs to
>>>>> be created with the code that we are testing) and I need to figure out
>>>>> how
>>>>> to create a user with
>>>>>
>>>>>
>>>>> When a list is created, does it use the code from the time of creation
>>>>> forever? Or, does updating the code update how the list works as well?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Jason
>>>>>
>>>>>
>>>>> mixed case addresses.  The easiest way to deal with the latter is that
>>>>> I
>>>>> will take on testing the test for the bug this is supposed to fix (SBT1
>>>>> --
>>>>> Jason has already dibbed SBT2), as I can't get to creating this user
>>>>> till
>>>>> tomorrow.
>>>>>
>>>>> Jason, can you let us all know when you have the list created?  (Or
>>>>> whoever
>>>>> you delegate this to creates it)
>>>>>
>>>>> Robin
>>>>>
>>>>> On Fri, Jun 4, 2010 at 3:04 PM, Jennifer Redman <jenred at gmail.com>
>>>>> wrote:
>>>>>
>>>>> Ok I've merged Kanika Vats changes into systers-dev/systers/development
>>>>> and
>>>>> pulled the changes to abiwt.org.
>>>>>
>>>>> Restarted Mailman.  System should now be ready for testing.
>>>>>
>>>>> Let me know if you have any problems.
>>>>>
>>>>> Jen
>>>>>
>>>>>
>>>>> To unsubscribe from this conversation, send email to <
>>>>> systers-dev+testing7+unsubscribe at systers.org<systers-dev%2Btesting7%2Bunsubscribe at systers.org>
>>>>> <systers-dev%2Btesting7%2Bunsubscribe at systers.org<systers-dev%252Btesting7%252Bunsubscribe at systers.org>
>>>>> >>
>>>>> or visit <
>>>>>
>>>>> http://systers.org/mailman/options/systers-dev?override=121&preference=0
>>>>> >
>>>>> To contribute to this conversation, use your mailer's reply-all or
>>>>> reply-group command or send your message to
>>>>> systers-dev+testing7 at systers.org <systers-dev%2Btesting7 at systers.org><
>>>>> systers-dev%2Btesting7 at systers.org<systers-dev%252Btesting7 at systers.org>
>>>>> >
>>>>> To start a new conversation, send email to <
>>>>> systers-dev+new at systers.org <systers-dev%2Bnew at systers.org><
>>>>> systers-dev%2Bnew at systers.org <systers-dev%252Bnew at systers.org>>
>>>>>
>>>>> To unsubscribe entirely from systers-dev, send email to <
>>>>> systers-dev-request at systers.org> with subject unsubscribe.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> To unsubscribe from this conversation, send email to <
>>>>> systers-dev+testing7+unsubscribe at systers.org<systers-dev%2Btesting7%2Bunsubscribe at systers.org>>
>>>>> or visit <
>>>>> http://systers.org/mailman/options/systers-dev?override=121&preference=0
>>>>> >
>>>>> To contribute to this conversation, use your mailer's reply-all or
>>>>> reply-group command or send your message to
>>>>> systers-dev+testing7 at systers.org <systers-dev%2Btesting7 at systers.org>
>>>>> To start a new conversation, send email to <
>>>>> systers-dev+new at systers.org <systers-dev%2Bnew at systers.org>>
>>>>> To unsubscribe entirely from systers-dev, send email to <
>>>>> systers-dev-request at systers.org> with subject unsubscribe.
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>>
>> --
>> Best Regards
>> Kanika Vats
>>
>
>