[Systers-dev] New Test Cycle - Membership Adaptor

[P. A. Grubel]

First, I registered for the mailman interface it put me in pending. I
received a bounced message in my email. I went to the admin account and
changed my membership, did the unsub test, which worked. But when I tried to
make a new membership it blocked me.
Second, I had trouble with the wiki, but I think I got confused at that
point. I was multi-tasking, thinking I could help my son with his Algebra II
problems, but he had a lot of them.
I really would like to help more, but apparently, I need to understand which
system is which. It doesn't seem that clear to me, but I keep getting short
bursts of time to work on it.
Is there anyway to clarify how to enter each site in one email?
Pat

-----Original Message-----
From: Jenred [mailto:jenred at gmail.com] 
Sent: Thursday, August 20, 2009 1:21 PM
To: P. A. Grubel
Cc: Anna Granudd; Malveeka Tewari; systers-dev+membershiptes at systers.org
Subject: Re: [Systers-dev] New Test Cycle - Membership Adaptor

Hi Pat,

Were you unable to log back into the wiki or the Mailman interface?

To edit the wiki you need to create an account - select the login  
button in the lower right-hand corner of the screen. If you already  
have an account you should be able to edit after you log in. If you  
forget your password use the send new password link (exact wording may  
be different).

Otherwise let me know where you got stuck.

Jen



On Aug 20, 2009, at 12:00, "P. A. Grubel" <pagrubel at tularosa.net> wrote:

> I started some testing but was not able to enter any results. I was  
> unable
> to log back on. The unsub worked.
> Pat
>
> -----Original Message-----
> From: systers-dev-bounces at systers.org
> [mailto:systers-dev-bounces at systers.org] On Behalf Of Anna Granudd
> Sent: Thursday, August 20, 2009 10:09 AM
> To: Malveeka Tewari
> Cc: systers-dev+membershiptes at systers.org
> Subject: Re: [Systers-dev] New Test Cycle - Membership Adaptor
>
> Hi,
> I did some testing on membership-dlist and membership-nodlist- 
> noessay. I
> think those two should be enough for the listinfo part, but it's up  
> to you
> if you think they need more testing. I couldn't log in to the admin  
> pages so
> would you please be so kind to check that anna.granudd at gmail.com has  
> digest
> set on both lists (I think) and anna.provar at gmail.com has it set to no
> digest? I'm not sure how to test the things implemented by you,  
> maybe you
> could add a table with things to test specific to your changes - or  
> have you
> already tested all that?
>
> Thanks and good luck with the rest of the tests,
> Anna
>
> On Wed, Aug 19, 2009 at 10:44 PM, Malveeka Tewari  
> <malveeka at gmail.com>wrote:
>
>> Hi
>>
>> I have started the testing for the Membership Adaptor.
>> I have created two lists:
>> membership-dlist
>> membership-nondlist (there is another list: membership-non-dlist -  
>> do not
>> confuse between the two)
>>
>> Have updated the wiki with the tests done already and instructions  
>> to look
>> into the db.
>>
>> Thanks
>> Malveeka
>>
>>
>> On Wed, Aug 19, 2009 at 8:24 AM, Jennifer Redman <jenred at gmail.com>  
>> wrote:
>>
>>> We are starting a new test cycle for the STORM Membership Adaptor.
>>> The STORM membership adaptor moves the MM membership management  
>>> from the
>>> .pck files to a sql database.  We are using postgreSQL -- but  
>>> ideally it
>>> should work with sqllite and mysql.  This is the middle part for
>>> integrating
>>> with OpenID.  Once this works -- we are fairly confident that
> interfacing
>>> with an alternate authentication system should be much easier then
>> hacking
>>> directly on MM.
>>>
>>> This version of the adaptor is integrated with Systers dlist
>> functionality
>>> -- but there is another version that is stand-alone for those who  
>>> may
> not
>>> want to use dlist enabled mailman.
>>>
>>> The checklists are here:
>>>
>>>
>>>
>>
>
http://systers.org/systers-dev/doku.php/checklist_for_30_july_2009_-_sql_mem
> bership_adaptor
>>>
>>> The test lists have been created - membership-
>>>
>>> Password is the usual (email me if you don't know and would like to
>> help).
>>>
>>> Malveeka is in charge of this test-cycle.  (Unfortunately, our  
>>> students
>> in
>>> India are already back in school so additional help is appreciated.)
>>>
>>> Feel free to run a few tests!  We need your help!  If you are  
>>> confused
> --
>>> feel free to email me directly (or you can find me on chat).
>>>
>>> We also have an irc channel on irc.freenode.net #systers-dev -- I'm
>>> usually
>>> there and if you say "jenred" I'll get a color change that tells  
>>> me to
>> look
>>> at that channel.  Or you can find me on gmail chat - jenred at gmail.com 
>>> .
>>>
>>>
>>> Testing on this branch to run through Thursday am (PDT) at which  
>>> point
>>> we'll
>>> begin our final cycle for the GSoC testing the updated ORM code
>> integrated
>>> with the new stable.
>>>
>>> We are planning a push to production on Monday evening -- if all  
>>> goes
>> well.
>>>
>>> Thanks,
>>> Jen
>>>
>>>
>>> To unsubscribe from this conversation, send email to <
>>>
> systers-dev+membershiptes+unsubscribe at systers.org<systers-dev 
> %2Bmembershipte
> s%2Bunsubscribe at systers.org>
>>
> <systers-dev%2Bmembershiptes%2Bunsubscribe at systers.org<systers-dev 
> %252Bmembe
> rshiptes%252Bunsubscribe at systers.org>
>>>>
>>> or visit <
>>> http://systers.org/mailman/options/systers-dev?override=32&preference=0 
>>> >
>>> To contribute to this conversation, use your mailer's reply-all or
>>> reply-group command or send your message to
>>>
> systers-dev+membershiptes at systers.org<systers-dev 
> %2Bmembershiptes at systers.or
> g>
>>
> <systers-dev%2Bmembershiptes at systers.org<systers-dev 
> %252Bmembershiptes at syste
> rs.org>
>>>
>>> To start a new conversation, send email to
> <systers-dev+new at systers.org<systers-dev%2Bnew at systers.org>
>> <systers-dev%2Bnew at systers.org <systers-dev%252Bnew at systers.org>>
>>>>
>>> To unsubscribe entirely from systers-dev, send email to <
>>> systers-dev-request at systers.org> with subject unsubscribe.
>>>
>>
>>
>> To unsubscribe from this conversation, send email to <
>>
> systers-dev+membershiptes+unsubscribe at systers.org<systers-dev 
> %2Bmembershipte
> s%2Bunsubscribe at systers.org>>
>> or visit <
>> http://systers.org/mailman/options/systers-dev?override=32&preference=0 
>> >
>> To contribute to this conversation, use your mailer's reply-all or
>> reply-group command or send your message to
>>
> systers-dev+membershiptes at systers.org<systers-dev 
> %2Bmembershiptes at systers.or
> g>
>> To start a new conversation, send email to
> <systers-dev+new at systers.org<systers-dev%2Bnew at systers.org>
>>>
>> To unsubscribe entirely from systers-dev, send email to <
>> systers-dev-request at systers.org> with subject unsubscribe.
>>
>
>
> To unsubscribe from this conversation, send email to
> <systers-dev+membershiptes+unsubscribe at systers.org> or visit
> <http://systers.org/mailman/options/systers-dev?override=32&preference=0 
> >
> To contribute to this conversation, use your mailer's reply-all or
> reply-group command or send your message to
> systers-dev+membershiptes at systers.org
> To start a new conversation, send email to <systers-dev+new at systers.org 
> >
> To unsubscribe entirely from systers-dev, send email to
> <systers-dev-request at systers.org> with subject unsubscribe.
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.62/2315 - Release Date:  
> 08/20/09
> 06:05:00
>
>
>
>
> To unsubscribe from this conversation, send email to
<systers-dev+membershiptes+unsubscribe at systers.org 
> > or visit
<http://systers.org/mailman/options/systers-dev?override=32&preference=0 
> >
> To contribute to this conversation, use your mailer's reply-all or  
> reply-group command or send your message to
systers-dev+membershiptes at systers.org
> To start a new conversation, send email to <systers-dev+new at systers.org 
> >
> To unsubscribe entirely from systers-dev, send email to
<systers-dev-request at systers.org 
> > with subject unsubscribe.


No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.392 / Virus Database: 270.13.62/2315 - Release Date: 08/20/09
06:05:00